|
|
 Can I locate my transmitter inside my discount k9 shock collars metal shed? yes, but k9 be aware that metal may interfere with the signal. test before installing. why can''t i locate my transmitter on my back-porch? the unit needs to be in a dry environment. how can i connect more wire shock together collars to contain a larger area? strip the end of the wires, place them together, and screw on a wire nut. will invisible discount equipment work with your system? no. they are using a different type of signal. is the receiver waterproof? k9 yes. can i run the shock wire through my chain link fence? yes, we have done thousands of installations like this with no problems why collars does the transmitter beep? there may be a break in the wire or it may not be installed completely. why discount will the loop light not come on? check for a break in the wire and make sure the wires are connected properly. can i run my wire k9 through my house? yes, but your house wiring shock and metal pipes collars may cause the system to not work as well as it can. also, your dog may receive a correction while in the house. i cannot hear the receiver? how do i prevent one dog from chewing on the collar of another dog? discount if you see one dog chewing on the other dog''s k9 collar - pull him off and redirect him shock to "sit" and "stay". also, a daily spraying collars of lysol on the dog''s collar will help repel the other dog. technical questions asked by our customers how many feet of wire can the deluxe system handle? the deluxe system can handle up to 4600 feet of wire. how do i keep the signal out of the back yard? on your layout of the wire you will need to do a double loop in the front yard, discount this is where you run k9 a wire twice in the front yard, this way there is no wire in the back. how do i twist shock and collars one wire together to cancel the signal in order to cancel the signal you must close your continuous discount loop, then twist the two k9 ends of the wire together. it must be twisted 8 to 10 twists per foot. this is best achieved by using a drill or cordless screwdriver. can i use a different size other than the 18-gauge shock wire for the boundary? yes, collars as long as you use a solid or stranded wire that is an discount 18, 16, or 14 gauge. this is somewhat breed dependent, but most breeds should be 16-20 weeks of age. during training an owner observes their dog sitting in the correction zone. the owner has touched the probes and has k9 determined the shock collar is working. the owner can see collars the dog''s skin flinch, so he is sure discount the dog is receiving the correction. what should the owner do to prevent this from happening k9 retrain the dog by putting it on a long leash. as soon as the dog is observed entering the corrective zone it should be pulled shock out and redirected to the "sit" and "stay" command. once a dog is trained to the system what is the collars best way to take the dog out of the boundary? create what is called an "invisible gate" and take the dog out only through this gate. once a dog is trained to the system discount how does the owner create the "invisible gate" concept? place a long leash on the dog. turn the system off. remove the dog''s collar. put the dog on the "sit" and "stay" command near the area k9 and shock that will become the "gate". owner walks out of yard and asks dog collars to "come". Do you have a dog that is hard to train or control? Surf on over to our site and learn about our selection of electronic shock collars that can help you train your k9 to be the perfect pet. Find prices and details on our site.
|